
Not all filter bags are built for the same job. As the exclusive Eaton industrial filtration distributor in New Zealand, SMS supplies a range of Eaton filter bag types - each engineered for a different combination of retention, dirt-holding capacity, and process demand. Choosing the wrong one usually shows up as a bag that blocks too fast, lets particulate through, costing more to run than it needs to.
Here's what each range is built for, and where it fits.
SENTINEL Monofilament bags are offered in a variety of construction materials and sealing rings including Sentinel, Santoprene, Zinc-plated, or Stainless snap-ring. Monofilament filter bags cover many applications with chemical and thermal properties suitable for mid-coarse filtration needs. Offering solutions for industrial, chemical, petrochemical and food grade facilities – it is often the front line of protection.
LOFCLEAR 100 steps up to a three-layer melt-blown polypropylene construction with a spunbond cover layer, welded to the same bypass-free sentinel seal ring. It's rated from 4 to 40 microns at greater than 99% efficiency, with dirt-holding capacity of up to 250g. It's suited to first-pass guard filtration of high-purity fluids with low particulate load, oil adsorption, and activated carbon removal. The go-to for applications where fine, consistent retention matters
ACCUGAF uses a graded-density melt-blown media in polypropylene or polyester, again fully welded and bypass-free, with retention ratings of 1.5, 3, 5, 10, and 25 microns at greater than 99% efficiency. Its polypropylene media is FDA and EC compliant for food contact, which makes it a common choice for beer, wine, spirits, and general beverage filtration, but is just as suitable for parts cleaning and activated carbon removal.
HAYFLOW combines the benefits of a bag and cartridge into a needle felt element with up to 65% more filter area than a standard bag, which allows either longer service life between changes or a smaller housing for the same flow rate. Retention ranges from 1 to 100 microns depending on the model. Suitable for paints, inks, resins, solvents, edible oils, and beverage applications where change-out frequency and downtime are the main cost driver, not just the retention rating.
MAX-LOAD is a coreless, melt-blown or thermo-bonded pleated filter bag with a rigid, multi-graded depth structure over 18mm thick, available in polypropylene or polyester. It's built to handle hard, metallic, and gel-type contaminants that would quickly clog a standard bag, making it the right choice where the feed carries heavy or variable solids loading rather than fine, consistent particulate.
In practice, the choice comes down to two questions - how fine does the retention need to be, and how much dirt does the bag need to hold before it needs changing? A clean feed with fine particulate calls for LOFClear or ACCUGAF. Industries with a feed with heavy or variable solids calls for MAX-LOAD or HAYFLOW. SENTINEL Monofilament remains the default general-purpose option where the process doesn't demand either extreme.
If you're not sure which range fits your application, the SMS team can talk you through the options and specify the right bag, housing, and retention rating for your process.